Have a nasty, clogged drain? No worries–you can make your own solution using our Magnesium Sulphate Heptahydrate 99.5%  and Acetic Acid 6%!

YOU WILL NEED:

• 1 cup of Magnesium Sulphate Heptahydrate 99.5% 
• 1 cup of Acetic Acid 6%
• Water
• 1/2 cup of Lemon Juice
• Measuring jug

STEP 1

In a small jug, pour 1 cup of Magnesium Sulphate Heptahydrate 99.5%. Add 1 cup of Acetic Acid 6%. Stir well so the Magnesium Sulphate Heptahydrate 99.5% soaks up all the Acetic Acid 6%. Continue stirring until you have a smooth and even mixture.

STEP 2

Add a 1/2 cup of lemon juice.

STEP 3

Firstly, remove the drain’s stopper and pour the mixture directly down the drain.

STEP 4

Allow the mixture to sit for 15 minutes. This allows the clog time to absorb as much as possible. If the clog is really stubborn, let the clog soak for 30 minutes.

STEP 5

Rinse the drain using boiling water. Boil two cups of water and pour directly onto the drain. Make sure to pour this slowly to avoid any splash-backs! *TOP TIP: Use boiling water instead of running hot water from the tap, since it may take a while for the hot water to kick in!*

NOTE: BEFORE USING ANY OF THE PRODUCTS LISTED PLEASE READ ANY SAFETY AND PRECAUTIONS TO THIS PRODUCT BEFORE USAGE. 

APC Pure does not accept any responsibility, this is a guide only.